ServicesWindow Retrofitting
Window Retrofitting in Whittier
We remove your old aluminum sashes and fit new vinyl windows into the existing frame openings, so your stucco and interior drywall stay untouched. Rooms are covered before we start and vacuumed before we leave.

What a Retrofit Window Is and When It Fits
A retrofit window is built to install inside the opening your old window already occupies. Most homes in Whittier and nearby towns like La Mirada and Norwalk were built with aluminum windows nailed in through a flange that sits behind the stucco. Pulling that flange out means cutting stucco, patching, and repainting. A retrofit avoids all of that. We strip out the old sashes and the inner frame parts, leave the original fin buried in the wall, and set the new unit against it.
Retrofitting is the right call when the wall framing around the window is sound and the opening is square enough to accept a new frame. It is not the right call when there is rot in the sill framing, a badly racked opening, or a size change you want. In those cases our window installation page covers the full-frame approach, and we will tell you which one your home needs during the estimate.
What the Retrofit Work Includes
Removal of old sashes and tracks
We cut out the aluminum sliders, fixed panes and bottom tracks down to the original frame. Old glass is carried straight to our truck in one trip, not stacked in your yard.
Flush-fin or Z-bar frame
Stucco homes usually get a flush-fin frame, whose exterior lip laps over the old frame and sits tight to the stucco. It covers the cut edge and looks finished from the street without any wall patching.
Shimming and fastening
Each frame is shimmed level and plumb, then screwed through the jambs into the existing frame. Square installation is what keeps sashes sliding freely and locks lining up years later.
Sealing and weatherproofing
We run sealant at the fin and the stucco line and fill gaps with low-expansion foam. Low-expansion matters because standard foam can bow a vinyl frame inward.
Interior finishing
Where the new frame meets your existing returns or trim, we caulk or add a small stop so the inside looks clean. Drywall and paint stay as they were.
Protection, daily cleanup and removal
Before the first cut, we lay covers over the flooring and any furniture close to the window. Each evening the sills and floors get vacuumed, debris goes out with us, and every old frame leaves on our truck.
Signs Your Windows Are Ready for a Retrofit
Sashes that drag or jump the track
Aluminum bottom tracks wear down and collect grit. Once the rollers bind, the sash scrapes and the latch stops catching.
Condensation between panes
Fog trapped inside a dual-pane unit tells you the spacer seal has broken down and the gas fill has leaked out. Cleaning will not clear it, because the moisture is sealed between the panes.
Hot or cold rooms by the glass
Aluminum frames conduct heat straight through. If the sill is hot to the touch on summer afternoons, the frame is part of the problem.
Pitted frames and failed weatherstrip
Gray oxidation, chalky frames and flattened pile weatherstrip let dust and drafts in around the sash.
Single-pane glass
Older homes often still have single glazing. A retrofit is the least disruptive way to move to dual-pane units in the same openings.
How a Retrofit Day Runs
- 1
Measure and inspect
At your free in-home estimate we measure each opening at three points, check the frame for square and look at the sill framing. You get a written quote that lists every window.
- 2
Protect the room
On install day we put down a covered path from your entry to every opening we will work on. Furniture near the glass is shifted or wrapped, and blinds or curtains come down and go wherever you prefer.
- 3
Remove and set
We work through the house one opening at a time, so only a single window is ever out of the wall. Each new frame is set, shimmed, fastened and tested for smooth operation before the next old unit comes out.
- 4
Seal and finish
Exterior sealant goes on at the fin, foam goes in the gaps, and the interior gets its caulk line or stop.
- 5
Walkthrough and cleanup
We vacuum each room, wipe the new glass and walk you through the locks and tilt latches. Old frames leave on our truck.
What Moves the Price of a Retrofit
Retrofit work usually costs less than full-frame installation because there is no stucco cutting, patching, or painting. The total still depends on the windows themselves and what we find in the openings. Your written quote breaks these out so nothing appears later.
- Number and size of openings
- Larger units need heavier glass and more labor to handle. Doing several windows in one visit spreads setup time across the job.
- Window style
- Sliders and single-hungs are the most straightforward. Casements, picture windows, and specialty shapes take more material and fitting.
- Glass package
- Low-E coatings, tempered glass where code requires it near doors or floors, and obscure glass for bathrooms each change the unit cost. Our energy efficient windows page explains the glass options.
- Condition of the old frame
- A frame that is badly out of square needs more shimming and sometimes a different trim approach. We note this at the estimate, not on install day.
- Upper-floor access
- Second-story openings may need extra ladder setup or interior-only installation, which adds time.
Window Retrofitting Questions
Something not covered here? (562) 554-5955
Will a retrofit window make my glass area smaller?
Slightly. The new frame sits inside the old one, so you give up a narrow strip of visible glass on each side. Vinyl frames with slim profiles keep that loss small, and we can bring a sample frame to the estimate so you can judge it in your own opening.
Is a retrofit as weathertight as a full-frame install?
When the existing fin is intact and the sealing is done properly, yes. The original flange stays bedded in the wall where it has always been, and the new frame is sealed to it and to the stucco. If we see water staining, soft wood or other signs of leaks around an opening, we will recommend full-frame installation for that window instead.
How messy is it inside the house?
Cutting out old aluminum throws off metal shavings and fine dust. We cover floors and furniture before any cutting starts and work on one opening at a time. Before we leave each day we vacuum and clear out everything we brought in or took out.
Do you have any current offers on retrofit windows?
Yes. Window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply). We also offer free in-home estimates with no sales pressure or obligation, so you can see the numbers for your openings before deciding anything.
Can I mix retrofit and full-frame windows in one project?
Yes, and it is common. Most openings in a house may be fine for a retrofit while one with a rotted sill or a size change needs full-frame work. Your quote will list which method each window gets and why.

Find Out Which Openings Can Be Retrofitted
We will measure every window, check each frame, and give you a written quote on the spot with no sales pressure or obligation. Free same day estimates are available.