Skip to content

Free in-home estimate, drop cloths down first

(562) 554-5955
(562) 554-5955

Whittier, CA

Window Replacement in Whittier, With Your Home Protected Room by Room

We take out worn aluminum and wood windows and set new energy efficient units. We also handle sliding door replacement, multi-folding doors and custom glass railings for homes in Whittier, La Habra and Norwalk. Floors get covered, furniture is moved and draped, and each opening is vacuumed before we leave for the day.

  • CSLB C-17 licensed
  • Bonded with $2 million insurance
  • Free in-home estimates
  • Floors covered, daily cleanup
Installer on an aluminum stepladder caulking the top of a new white window frame on a tan stucco house wall, palm trees and a neighboring home behind

Windows and Doors We Install

Most of our work is window replacement: pulling out old single-pane aluminum sliders or tired wood sashes and setting new vinyl units with Low-E glass. We also do new window installation for additions and remodels, and window retrofitting that fits a new frame into the old opening without tearing up stucco. On the door side, we handle sliding door replacement and multi-folding doors. Custom glass railings round out the list. Each service page explains the parts, the process and what affects the price.

  • Installer in a navy shirt and tool belt sets a white-framed window into an opening in a brick wall of a single-story home, with an aluminum ladder nearby

    Window Replacement

    We swap failing single-pane and aluminum windows for sealed dual-pane units, protect your floors and furniture, and leave each room clean when we finish.

  • Over-the-shoulder view of an installer in gloves positioning a white-framed sliding glass door panel at a stucco house opening, with drop cloths and a fenced backyard

    Sliding Door Replacement

    New sliding glass doors with a flashed sill, smooth rollers and insulated glass, installed with your floors covered and the old unit hauled away.

  • Window Installation

    New windows for additions, remodels and freshly cut openings, framed, flashed and sealed into the wall, with the work area cleaned at the end of every day.

  • Multi-Folding Doors

    Wide folding glass doors built for your opening, set on a level sill under a stiff header, with dust walls up and the work area cleaned every day.

  • Window Retrofitting

    New windows fitted into your existing openings without tearing out stucco or interior trim, with the old aluminum hauled away and your rooms cleaned daily.

  • Energy Efficient Windows

    Dual-pane, low-E windows matched to each wall's sun exposure, so rooms stay cooler and your AC runs less, installed with floors and furniture covered.

  • Custom Glass Railings

    Tempered or laminated glass guards for decks, balconies and stairs, anchored into solid framing and installed with the site swept clean each day.

What Moves the Price of a Window Job

Two windows the same size can cost different amounts to replace. The difference usually comes from the installation method, the glass package and what we find once the old frame is exposed. These are the factors we look at during the estimate.

Your estimate is written per opening, listing the window type, glass and installation method, so you can see where each cost comes from. If we find a problem in the wall after removal, we stop and talk with you before any added work.

Retrofit or full-frame
A retrofit window has a flange that covers the old aluminum frame and seals against the stucco, so the wall stays intact. Full-frame replacement removes everything down to the studs. It costs more because it involves stucco or siding patching and interior trim work.
Size and quantity
Larger openings need heavier glass and sometimes tempered panes. Ordering several windows at once usually lowers the per-window labor, since setup and cleanup are shared across the job.
Glass package
Dual-pane glass with a Low-E coating and argon fill cuts heat gain compared with single-pane glass. Upgrades such as laminated glass for sound, or obscure glass for bathrooms, change the cost.
Tempered glass requirements
Code calls for tempered glass near doors, tubs, showers and floors. Those panes cost more to produce, and we point them out during the estimate so they don't come up later.
Condition of the opening
Water that got past failed caulk can soften a wood sill or rot framing. If we find damage once the old unit is out, we show it to you and explain the fix before we do anything more.

Where We Install

We are based in Whittier and schedule installs across the neighboring communities, from South Whittier and West Whittier-Los Nietos to La Habra, La Mirada, Norwalk, Santa Fe Springs and Pico Rivera. To the north, our crews also work in Hacienda Heights, La Puente and South El Monte.

  • Whittier
  • Norwalk
  • La Habra
  • Pico Rivera
  • South Whittier
  • Hacienda Heights
  • La Mirada
  • La Puente
  • West Whittier-Los Nietos
  • South El Monte
  • Santa Fe Springs

Live just outside these communities? Phone us with your location and we'll check whether a free in-home estimate fits our route. More detail is on the Service Areas page.

More on the areas we cover

2 mi4 mi6 miNorwalkLa HabraPico RiveraSouth WhittierHacienda HeightsLa MiradaLa PuenteWest Whittier-Los NietosSouth El MonteSanta Fe SpringsWhittierN

How a Window Replacement Day Runs

Most homes take one or two working days, depending on how many openings we're replacing. Here is the order we follow.

  1. 1

    In-home estimate and measuring

    We measure each opening at three points across the width and height, because older frames are rarely square. We also check how the existing frame is attached. Then we go over options and write up the estimate.

  2. 2

    Ordering custom units

    Replacement windows are built to the sizes we took, not pulled from stock. After you approve the order, we pick an install date that lines up with when the factory delivers.

  3. 3

    Protecting the work area

    On install day, we cover floors along the walking path, move and drape furniture, and take down blinds. Outside, we lay tarps under each window to catch debris above planters and walkways.

  4. 4

    Removal and installation

    We cut out the old sashes, prepare the frame and set the new unit level and plumb with shims. Then we seal the exterior with a sealant suited to stucco, keeping the weep holes clear so water can still drain.

  5. 5

    Cleanup and walkthrough

    We vacuum, wipe down sills and glass, and remove the protection. Then we walk through with you, opening and locking each window so you can check the operation.

Worker in a cap and tool belt writes on a clipboard beside a worn sliding patio door on a covered concrete patio, with old window frames, a ladder and tools nearby
Two workers carry an old removed window across a front lawn toward a white van, past a stucco house with an empty window opening and a ladder

About Window Replacement Whittier

We are a window and door installer working in homes around Whittier. Much of what we replace is original equipment from the mid-century building boom: thin aluminum frames, single-pane glass, worn rollers and weatherstripping that has dried out after years of sun. Those windows let summer heat straight in and make rooms noisy. New dual-pane units fix both problems.

How we leave your home matters as much as the window itself. Covering floors, hauling off every old frame and cleaning each day are part of every job we do. Before we start, we walk the path from your door to each opening with you, so you know where the drop cloths go and which furniture we'll move.

License
CSLB C-17 licensed
Insurance
Bonded and insured; $2 million insurance coverage

Window Replacement Questions

Will replacing my windows make a mess inside my house?

Some dust and debris come with removing an old frame, but we keep it contained. Floors are covered along the path to each window, furniture is moved and draped, and old units go straight to our truck. We vacuum and wipe down at the end of each day, not only when the job is finished.

What is the difference between retrofit and full-frame replacement?

A retrofit window slips into the existing opening, with a flange that covers the old frame and seals against the stucco. Your exterior wall and interior trim stay intact. Full-frame replacement removes the entire old frame down to the rough opening, which is needed when the frame is damaged or you want to change the window size. We'll tell you which one your openings need and why.

How much does window replacement cost?

It depends on size, glass, installation method and the condition of each opening, so we give exact numbers during the free in-home estimate. Our current offer is window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply).

How long will the installation take?

Most homes take one or two working days, depending on how many openings are on the order. Each window we pull out gets its replacement set and sealed the same day, so no opening sits open overnight. We'll give you the expected number of days when we write the estimate.

Do new windows actually lower cooling costs?

Dual-pane windows with a Low-E coating reflect much of the sun's heat that a single pane lets through. The argon gas between the panes slows heat transfer through the glass. Rooms that face west or south usually feel the biggest change. The Energy Efficient Windows page explains the ratings.

Do I need a permit for window replacement?

Many jurisdictions require a permit for window replacement, and California's energy code sets performance standards for the new glass. Where a permit is required, we handle it as part of the job. We'll let you know at the estimate what applies to your home.

How soon can I get an estimate?

We offer free same day estimates, depending on our schedule. The visit includes measuring and an explanation of options, with no sales pressure or obligation.

How We Keep Your Home Clean While We Work

Taking out a window means old glass, broken caulk, crumbling putty and sometimes decades of dust inside the frame. Here is how we keep that mess off your floors and out of your rooms.

Floors and furniture covered first

Before a single screw comes out, we lay drop cloths from the door to each window. We move furniture away from the wall and cover what stays. Window coverings come down and get set aside where they won't collect dust.

Old units leave the property with us

Removed sashes, frames and broken glass go straight into our truck. Nothing sits on your lawn or driveway overnight, and you never have to arrange a haul-away.

Cleanup at the end of every day

On jobs that run more than one day, we vacuum each finished opening and wipe down the sills and new glass. We also sweep the exterior work area before leaving. You get your rooms back each evening, not just on the last day.

Sealed openings before we go home

We don't leave an opening covered with plastic overnight. Each window we remove gets its replacement set, shimmed and sealed the same day, so your home stays secure and weather-tight.

Estimates without the sales push

Our free in-home estimates come with no sales pressure or obligation. We measure, explain what we see and leave the decision to you.

Single-story stucco house with new white-framed windows on each side of a black entry door with glass sidelites, shrubs, lawn, walkway, and a tool bin and bucket

See Your New Windows Priced Opening by Opening

We'll come out, measure every window and explain the installation method and glass we'd recommend. You get a written estimate and a clear picture of how we'll protect your home during the work.